Site Survey and Moisture Mapping
A full survey using moisture meters, thermal imaging cameras and boroscopes to map foam coverage, trapped moisture and timber condition. You get a written scope and fixed price within one working day of the visit.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
5+ Years Trusted in Cheltenham
What Commercial Spray Foam Removal Includes
Every commercial foam removal job includes the survey, the removal itself, waste disposal and a clearance report. Additional work, such as timber replacement or new insulation, is quoted separately after the survey so you can see exactly what you are paying for.
Controlled Foam Removal
Removal of open cell and closed cell spray foam using dry ice blasting machines, thermal removal tools and hand tools, with industrial vacuums and air scrubbers running throughout to control dust and debris.
Waste Bagging and Disposal
All foam waste is bagged on site and removed under waste transfer notes through licensed contractors. We separate recyclable packaging and timber where possible and document the disposal route in your report.
Structural Drying and Checks
After removal we monitor the structure with moisture meters until timber readings return to safe levels. Any rot found is cut out and replaced, and we reinstate a vapour barrier and ventilation path where required.
Clearance Report and Photographs
A written clearance report with before-and-after photographs, moisture readings and a summary of works. This is the document lenders, surveyors and insurers ask for, and most Cheltenham clients receive it within three working days.
Commercial Spray Foam Removal in Cheltenham Explained
Commercial Spray Foam Removal in Cheltenham is the controlled stripping of spray-applied polyurethane foam from commercial buildings, followed by cleaning, drying and reinstatement of the structure. We remove open cell and closed cell spray foam from roof decks, wall cavities, plant rooms and warehouse ceilings, using dry ice blasting machines, thermal removal tools and industrial vacuums. Every job starts with a moisture meter and thermal imaging camera survey so we know exactly how far the foam has spread and what it has damaged.
Most Cheltenham commercial jobs we see come from three situations: a failed insulation spec in a 1960s-1990s building, a lender refusing a mortgage or refinance because of spray foam in the roof, or a leak that has been trapped behind the foam for years. We also handle business spray foam removal near me Cheltenham Gloucestershire enquiries from landlords and managing agents who need a building cleared before a new tenant moves in. Whether it is a warehouse spray foam removal in Brockworth or an office strip-out in Montpellier, the goal is the same: get the foam out, get the building dry, get it signed off.
How Our Commercial Foam Removal Process Works
Every job follows the same five stages. You get a fixed price after the survey, a written method statement before we start, and a clearance report when we finish.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and Methods We Use
Tools & Equipment
Dry ice blasting machine
Freezes and lifts foam from roof decks and substrates without the abrasion of sand blasting. Preferred on delicate or historic timbers.
Thermal removal tools
Heated blades that soften dense closed cell foam before stripping. Slower than blasting but gentler on fragile roof structures.
Industrial vacuum and air scrubber
Captures dust and airborne particles at the point of removal, keeping occupied commercial spaces clean during working hours.
Boroscope and moisture meter
Inspects behind foam and inside roof voids for hidden leaks and rot, and measures timber moisture content before and after removal.
Thermal imaging camera
Maps foam coverage and cold spots across large roof areas, showing where insulation has failed or moisture is trapped.
Scaffolding and powered access
Provides safe working platforms for warehouse and office roof decks, erected by PASMA and IPAF trained operatives.
Respirator and containment sheeting
Protects operatives and separates the work area from occupied space, with negative air pressure where required.
Methods & Standards
Dry ice blasting removal
Compressed dry ice pellets freeze the foam surface, causing it to crack and lift from the substrate. We use this on roof decks and delicate timbers where sand blasting would cause damage. Dust is captured with industrial vacuums and air scrubbers.
Thermal removal
Heated blades and thermal tools soften dense closed cell foam so it can be peeled away in sections. Slower than blasting, but the safest option for historic Cheltenham buildings and fragile roof structures.
Sand blasting removal
Used only on hard, dense foam where other methods are too slow. We control dust with full containment and air scrubbers, and we assess the substrate first to confirm it can take the abrasion.
Moisture mapping and drying
Before and after removal we map moisture with meters and thermal imaging, then monitor the structure until timber readings return to safe levels. This evidence goes into your clearance report.
Waste routing and documentation
All foam waste is bagged, removed under waste transfer notes and routed through licensed contractors. We separate recyclable packaging and timber where possible and document the disposal route.
When to Book Commercial Spray Foam Removal
01
A lender has flagged spray foam in the roof of a commercial unit you are trying to sell or refinance in Cheltenham.
What we do: We survey the roof, remove the foam using dry ice blasting and thermal tools, dry the structure and issue a clearance report formatted for lenders and their valuers. We work to your deadline where possible.
→ A documented, foam-free roof that satisfies the surveyor, allowing the sale or refinance to proceed.
02
You manage a warehouse in Brockworth or Quedgeley where foam is trapping condensation and dripping onto stock.
What we do: We map the foam and moisture with thermal imaging, remove it from the roof deck and vents, and reinstate airflow. Work is scheduled at night or at weekends so your operation keeps running.
→ No more drips onto stock, lower internal humidity and a roof that can breathe again.
03
An office or retail unit in Cheltenham town centre needs foam removed before a new tenant moves in.
What we do: We run out of hours commercial spray foam removal Cheltenham jobs from 6pm to 6am, with containment and air scrubbers to keep dust out of customer-facing areas. The unit is ready for fit-out each morning.
→ A clean, foam-free ceiling void ready for new insulation and a tenant handover on schedule.
04
You have inherited a building with spray foam applied to a cavity wall and damp is appearing on internal plaster.
What we do: We remove the cavity wall foam through controlled access points, check the cavity for damp and document the condition of the wall ties and inner leaf. Any remedial work is quoted separately.
→ A dry cavity, a clear picture of the wall condition and a building that can be insulated correctly.
How Foam Removal Runs in Cheltenham
Cheltenham's commercial stock is a mix of Victorian town-centre buildings, 1960s-1990s offices and industrial units around Brockworth, Quedgeley and Barnwood. Each behaves differently. Older buildings have lime plaster and timber that need gentler thermal removal tools, while modern warehouse roofs can take dry ice blasting. The local climate matters too: Cheltenham sits in a damp valley with cold winters and humid summers, so foam that traps moisture causes rot faster here than in drier parts of the country. We see a spike in commercial spray foam removal in Cheltenham town centre enquiries each autumn, once heating goes on and damp patches start showing. If you need business spray foam removal near me Cheltenham Gloucestershire, we cover the whole town and surrounding villages, and we schedule around your trading hours.
Neighborhoods We Serve
-
Montpellier
Victorian commercial buildings with ornate plaster and timber. We use thermal removal tools rather than blasting to protect historic ceilings.
-
Brockworth
Large industrial units and warehouses with high roof decks. Powered access and night working are standard here.
-
Cheltenham town centre
Retail and office units where work must run out of hours to avoid disrupting trade and customer access.
-
Charlton Kings
A mix of older commercial conversions and residential properties with loft foam issues flagged by lenders.
-
Quedgeley
Modern distribution and light industrial buildings where foam has been applied to roof decks without ventilation gaps.
Local Conditions We Plan For
-
Damp valley climate with cold winters
Moisture trapped behind foam causes timber rot faster here than in drier regions, so early survey and removal is more urgent.
-
Victorian and mid-century building stock
Older timbers and lime plaster need gentler thermal removal methods rather than aggressive blasting.
-
High proportion of commercial units with roof-deck foam
Lenders and surveyors in Gloucestershire routinely flag spray foam, so clearance reporting is a standard part of our work.
-
Occupied town-centre buildings
Work is scheduled out of hours with containment and air scrubbers to keep shops and offices trading normally.
Brockworth Warehouse Ceiling Clearance
Commercial Spray Foam Problems We Solve in Cheltenham
Failed spray foam causes more damage than most building owners realise. These are the problems we see most often on Cheltenham commercial sites, and what happens if they are left alone.
Problem
Trapped moisture rotting roof timbers
Foam seals the roof deck so moisture cannot escape. Rafters and purlins soften from the inside, and by the time a stain appears on a ceiling tile the timber may already need replacing.
Our Fix
We survey with moisture meters and boroscopes, remove the foam, dry the structure and replace any rotten timber. Most Cheltenham roofs we treat stop deteriorating within one heating season once airflow is restored.
Problem
Mortgage or refinance refused because of foam
Lenders routinely decline commercial mortgages where spray foam has been applied to a roof structure without a ventilation gap. The building becomes unsellable and the owner is stuck.
Our Fix
We remove the foam and provide a clearance report with photographs and moisture readings that surveyors and lenders accept. We have cleared Cheltenham commercial units that had been stalled for over 18 months.
Problem
Blocked roof ventilation causing condensation
Spray foam blocks the eaves and ridge vents that keep a roof dry. Condensation forms on cold surfaces, drips onto stock and creates the damp conditions that feed mould.
Our Fix
We strip the foam from vents and roof decks, reinstate a clear ventilation path and check airflow with a boroscope. On a typical warehouse roof this drops internal humidity enough to stop surface mould returning.
Problem
Failed insulation spec and rising energy bills
Foam that has shrunk, delaminated or been applied too thin no longer performs. Heating costs rise, the building fails its energy assessment and tenants complain about cold units.
Our Fix
We remove the failed foam and specify a compliant replacement build-up using insulation boards, a vapour barrier and timber battens. You get a documented, code-correct insulation system for your insurer and any future lease.
Why Clear Spray Foam From Commercial Buildings
Failed spray foam does not just sit there. It traps moisture, blocks ventilation and stops lenders from releasing funds. Here is what proper removal actually delivers for a Cheltenham commercial property.
-
Restores Roof Ventilation
Spray foam applied to the underside of a roof deck blocks the airflow that timber needs. We remove it and reinstate a clear ventilation path, which stops condensation forming on rafters. On a typical 200 sq m warehouse roof, that alone can drop internal humidity enough to stop surface mould returning within one heating season.
-
Unblocks Mortgage and Refinance
Lenders routinely refuse mortgages where spray foam has been applied to a roof structure without a ventilation gap. Our removal reports, with before-and-after photos and moisture readings, give surveyors and lenders the evidence they need. We have cleared commercial units in Cheltenham town centre that had been unsellable for over 18 months.
-
Stops Hidden Timber Decay
Trapped moisture behind foam rots rafters, purlins and battens from the inside. By the time you see a stain on a ceiling tile, the timber behind it may already be soft. We use boroscopes and moisture meters to find decay early, then remove the foam so the timber can dry and be treated or replaced.
-
Prepares for Compliant Insulation
Once the old foam is out, we can specify and fit insulation boards, a vapour barrier and timber battens that meet current building regulations. That gives you a documented, code-correct insulation build-up for your insurer, your lender and any future sale or lease of the property.
Accredited and Insured Foam Removal
Licensed & Certified
- CHAS Accreditation — issued by CHAS (Contractors Health and Safety Assessment Scheme)
- Constructionline Registration — issued by Constructionline
- SafeContractor Approval — issued by SafeContractor (Alcumus)
- PASMA Certification — issued by Prefabricated Access Suppliers' and Manufacturers' Association
- IPAF Certification — issued by International Powered Access Federation
Verified Reviews
Google ★★★★★4.9
Removed spray foam from our warehouse ceiling in Brockworth over four nights. Clean, organised and the clearance report was exactly what our insurer wanted. No disruption to our shifts.
Google ★★★★★5.0
Our refinance had been stuck for over a year because of foam in the roof. Spray Foam Heritage Homes removed it, documented everything and the surveyor signed off without a problem.
Checkatrade ★★★★★4.8
Office spray foam removal in Cheltenham town centre, done out of hours so we did not lose a day's trading. Fixed price, no extras, and the ceiling was ready for new insulation.
Google ★★★★★4.9
Surveyed our Quedgeley unit on Tuesday, quoted Wednesday, started the following Monday. Foam gone, vents clear, moisture readings back to normal. Straightforward and professional.
Five Years Removing Spray Foam in Gloucestershire
Spray Foam Heritage Homes has been removing spray foam across Cheltenham and Gloucestershire since 2021. In that time we have stripped foam from warehouses, offices, retail units, agricultural buildings and residential lofts. Our operatives hold PASMA and IPAF certifications for access equipment, and we work to BPCA, CHAS, Constructionline and SafeContractor standards. We know the difference between Icynene, Lapolla, Demilec, BASF and Huntsman foam systems because we have removed all of them, and each one behaves differently under a blade.
- Five years of spray foam removal across Cheltenham, Gloucester and the surrounding Gloucestershire commercial stock.
- PASMA and IPAF certified for scaffolding, towers and powered access on warehouse and office roof decks.
- CHAS, Constructionline and SafeContractor accredited, with BPCA-aligned containment and waste handling.
- Experienced with Icynene, Lapolla, Demilec, BASF and Huntsman foam systems and their removal characteristics.
- Equipped with dry ice blasting machines, thermal imaging cameras, boroscopes and industrial air scrubbers.
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners and property managers.
Do you offer commercial spray foam removal in Cheltenham?
Yes. We cover Cheltenham and the whole of Gloucestershire, including Montpellier, Lansdown, Charlton Kings, Bishops Cleeve and Brockworth. We remove spray foam from warehouses, offices, retail units, agricultural buildings and residential lofts. Call 01242 375143 and we will book a survey, usually within 48 hours, and give you a fixed price within one working day of that visit.
How much does business spray foam removal cost in Cheltenham Gloucestershire?
Typical 2026 pricing for commercial spray foam removal in Cheltenham runs from £1,800 for a small office roof up to £12,000 or more for a large warehouse ceiling. The main drivers are total foam area, whether it is open cell or closed cell, access requirements and how much timber repair is needed. We give a fixed written price after the survey, so you know the figure before we start.
Can you work out of hours for commercial spray foam removal in Cheltenham?
Yes. We regularly run out of hours commercial spray foam removal Cheltenham jobs from 6pm to 6am and across weekends for offices, shops and warehouses that cannot close during the day. Containment sheeting and air scrubbers keep dust and noise away from trading areas. There is a small out-of-hours supplement, quoted upfront in your fixed price.
What is the best commercial spray foam removal near me in Cheltenham?
The best contractor is the one who surveys properly, gives you a fixed price and hands over a clearance report your lender will accept. We have been removing foam across Gloucestershire since 2021, hold CHAS, Constructionline and SafeContractor accreditation, and use dry ice blasting, thermal imaging and boroscopes on every job. Ask for references from Cheltenham commercial clients before you book anyone.
Related Services
Spray Foam Removal near me
If you need spray foam removal near me in Cheltenham, we cover the whole town and surrounding villages. Same team, same equipment, same clearance reporting, whether it is a single roof bay or a full warehouse ceiling.
View Spray Foam Removal near mesame day Spray Foam Removal
For urgent commercial cases, such as a lender deadline or a leak that has just been discovered, we can sometimes attend the same day for a survey. Removal itself is scheduled within days, not weeks, depending on access.
View same day Spray Foam Removal24/7 Spray Foam Removal
Our 24/7 spray foam removal line is for commercial emergencies: active leaks into foam, storm damage or a building that must be cleared before a Monday handover. Call 01242 375143 any time and we will arrange the next available slot.
View 24/7 Spray Foam RemovalResidential Spray Foam Removal
We also remove foam from homes across Cheltenham, often because a mortgage lender has flagged it in a roof void. The same controlled methods and clearance reporting apply, scaled to a domestic property and its access constraints.
View Residential Spray Foam Removalloft spray foam removal
Loft spray foam removal is one of our most common jobs in Cheltenham. Foam applied between rafters traps heat and moisture, rots timbers and blocks ventilation. We strip it, dry the loft and reinstate a compliant insulation build-up.
View loft spray foam removalroof spray foam removal
Roof spray foam removal on commercial buildings usually means working from scaffolding or a powered access platform. We remove foam from the underside of roof decks, clear blocked vents and document the work for your insurer or lender.
View roof spray foam removalContact our Cheltenham team
Call us on 01242375143 or email [email protected] and we will arrange a free survey at your Cheltenham property. Our phone line is answered 24/7, and we aim to book surveys within 48 hours across Gloucestershire. If you have photos of the foam, send them over and we can often give you an initial view before we visit.
Spray Foam Heritage Homes
-
Phone
01242375143 -
Address
15-21 Clarence Street, Cheltenham, GL50 3JL, UK, Cheltenham, Gloucestershire
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available