Spray Foam Heritage Homes
Get Estimate

Thermal spray foam removal in Cheltenham done properly

Specialist heat based spray foam removal across Cheltenham and Gloucestershire


If spray foam insulation is blocking your loft, trapping moisture or holding up a mortgage, our thermal spray foam removal in Cheltenham gets it out cleanly and fast. We use heat based spray foam removal in Cheltenham to soften and lift foam without wrecking your roof timbers, plasterboard or felt. Five years in business, thousands of square metres cleared across Gloucestershire, and a finish your surveyor will sign off.

A dramatic industrial fire with flames engulfing machinery in a nighttime scene.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed 5+ Years Trusted in Cheltenham

What our thermal spray foam removal includes

Every job includes a full survey, protection of your home, thermal removal, extraction and a final clean. We also provide documentation for lenders and a workmanship warranty. Add-ons like new insulation or timber treatment are quoted separately if needed.

Full loft survey

We inspect the foam, check moisture with a meter and thermal camera, and look for hidden leaks or rot. You get a written report and fixed quote the same day.

Dust and site protection

We seal doorways, lay sheets and set up air scrubbers before any work starts. Your furnishings and carpets stay clean throughout the job.

Thermal foam removal

Our technicians heat and cut away all foam, including open cell and closed cell types, using hot knife and thermal tools. We work carefully around rafters and felt.

Full extraction and clean

Every scrap of foam is bagged and removed. We vacuum the loft, wipe down timbers and leave the space ready for inspection or new insulation.

Lender documentation

You receive before-and-after photos, moisture readings and a written summary that mortgage lenders and surveyors accept. We can send it directly to your lender if you prefer.

What thermal spray foam removal in Cheltenham involves


Thermal spray foam removal in Cheltenham is the controlled process of heating cured polyurethane foam until it releases from the substrate, then cutting and extracting it without damaging the roof structure underneath. Whether it is open cell spray foam sprayed between rafters or closed cell spray foam bonded to felt and timber battens, we use thermal removal tools and hot knife spray foam removal techniques to lift it in sections. No chemical stripping, no smashed tiles, no guesswork.

Most Cheltenham homes we attend have the same story: foam was installed years ago, the roof cannot breathe, and now there is condensation, damp patches or a mortgage lender refusing to proceed. Regency and Victorian properties around Montpellier and Pittville are the worst affected because their roof voids were never designed for a sealed foam layer. If you need heat based spray foam removal near me Cheltenham Gloucestershire, we survey first, then quote before any work starts.

How our thermal removal process works

Every job follows the same five stages, from first survey to final clean. You get a fixed price before we start and a walkthrough at the end.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and methods we use

Tools & Equipment

Thermal removal tools

Heated blades and panels that soften cured foam so it releases from timber without gouging the surface.

Hot knife equipment

Precision cutting of dense closed cell foam into manageable sections before extraction.

Industrial vacuum and air scrubber

Captures dust and foam particles at source, keeping your home clean and the air safe to breathe.

Boroscope and moisture meter

Inspects hidden voids and checks timber moisture levels before, during and after removal.

Thermal imaging camera

Finds cold spots and hidden damp behind foam, so we remove only what needs to come out.

Scaffolding and PASMA-certified access

Safe working at height for roof-level removal, erected by our own PASMA-trained team.

Respirators and PPE

Protects our technicians from dust and foam particles, and keeps your family safe while we work.

Methods & Standards

Heat based softening

We apply controlled heat to the foam until it releases its bond. This avoids chemicals and protects the roof structure. It is the core of our heat based spray foam removal Cheltenham service.

Sectional extraction

Foam is cut into sections and removed in sequence, starting at the eaves and working up. This keeps the roof balanced and prevents sudden releases of trapped debris.

Dry ice blasting

For delicate surfaces or listed buildings, we use dry ice blasting spray foam removal. The dry ice freezes residue and lifts it without abrasion, ideal for fragile felt or historic timbers.

Sand blasting residue removal

On brick or stone where foam has left a stubborn film, we use sand blasting spray foam insulation removal to strip the last traces without damaging the masonry.

When to book thermal spray foam removal

01

You are selling your Cheltenham home and the buyer's surveyor has flagged spray foam.

What we do: We carry out an urgent survey, quote the same day and can often schedule removal within a week. We provide the documentation your buyer's lender needs.

→ Your sale proceeds without further delay, and the buyer gets a clean, ventilated roof void.

02

Your loft has condensation, damp patches or a musty smell that will not go away.

What we do: We inspect with a moisture meter and thermal camera, then remove the foam that is trapping water. We check timbers for rot and advise on ventilation.

→ The damp smell goes, timbers dry out and your loft becomes usable storage space again.

03

You have inherited a property with spray foam and want it gone before you renovate.

What we do: We clear the foam from rafters and felt, leaving the structure ready for new insulation boards and a vapour barrier. We can work alongside your builder.

→ Your renovation starts with a clean, dry roof space and no hidden foam to work around.

04

A commercial landlord needs foam removed from a warehouse roof before re-letting.

What we do: We survey the roof, plan phased removal to keep the unit usable and work around your schedule, including night shifts if needed.

→ The unit is re-let faster with a clear roof structure and no foam-related insurance issues.

How thermal spray foam removal runs in Cheltenham

Cheltenham's building stock shapes how we work. Regency and Victorian properties in Montpellier, Lansdown and Pittville often have shallow roof voids and fragile felt, so we use lower heat settings and dry ice blasting where needed. Modern estates in Hatherley and Up Hatherley tend to have deeper lofts with closed cell foam, which needs hot knife equipment. The local climate is damp for much of the year, and that trapped moisture is what causes most of the rot we see. We also work around Gloucestershire's conservation area rules, which restrict external changes on listed buildings. If you need affordable thermal spray foam removal Cheltenham homeowners can trust, we survey first and explain exactly what the job involves.

Neighborhoods We Serve

  • Montpellier

    Many Regency villas here have original roof timbers and delicate felt, so we use low-heat thermal tools and dry ice blasting to protect the fabric.

  • Pittville

    Larger detached homes often have deep lofts with closed cell foam. We use hot knife equipment and scaffolding for safe access.

  • Charlton Kings

    A mix of 1930s semis and newer builds. Foam here is often open cell, which we can clear in a single day.

  • The Suffolks

    Terraced homes with tight loft access. We use compact thermal tools and boroscopes to work without cutting extra hatches.

  • Bishops Cleeve

    Modern estates with deep roof voids and dense foam. We schedule two-day jobs and bring extra extraction kit.

Local Conditions We Plan For

  • Damp, mild winters with high humidity

    Trapped moisture is common, so we always test with a moisture meter and thermal camera before quoting. Removal often reveals hidden damp that needs treating.

  • Conservation areas and listed buildings

    External changes are restricted, so we use internal access and dry ice blasting to avoid altering the roof line or exterior finish.

  • Older roof felt that is brittle

    We lower heat settings and use hand tools near fragile felt to avoid tearing. If felt is already damaged, we flag it for repair before removal.

Victorian terrace in Tivoli

Before

A 1890s terrace with closed cell foam sprayed between rafters. The loft was damp, the felt was rotting and the owner's mortgage lender had refused to proceed. Foam depth averaged 120mm.

After

We removed all foam in two days using thermal tools and hot knife equipment. Moisture readings dropped from 28% to 12%. The lender received our report and the sale completed within a week.

Maintenance: We advised fitting lap vents and checking the loft annually. The owner now keeps a dehumidifier running in winter to keep moisture levels stable.

Before

Open cell foam had been sprayed across the entire roof, blocking eaves and causing condensation. The homeowner noticed a musty smell and damp patches on stored boxes. Foam covered 45 square metres.

After

Removal took one day. We cleared the eaves, restored airflow and vacuumed the loft. The smell disappeared within days and the homeowner converted the space into a home office.

Maintenance: We recommended leaving the loft hatch ajar for a few hours each week to maintain airflow. Annual moisture checks keep it dry.

Before

A 1990s detached house with dense closed cell foam on the roof deck. The owner was selling and the buyer's surveyor flagged the foam as a defect. Scaffolding was needed for roof access.

After

We removed 60 square metres of foam over three days, using scaffolding and hot knife equipment. The surveyor signed off the clean roof void, and the sale went through at full asking price.

Maintenance: The new owner was advised to keep the loft ventilated and check for leaks after storms. We provided a written maintenance schedule.

Problems our thermal removal solves

Foam that was meant to save energy often causes bigger problems down the line. Here are the issues we fix most often for Cheltenham homeowners.

Problem

Mortgage lender refuses to lend on a foam-insulated roof

Your sale falls through, you lose your buyer and you may have to drop the price. The foam has to go before any lender will proceed.

Our Fix

We remove the foam, restore ventilation and provide the documentation your lender needs. Most buyers we help complete within two weeks of our report.

Problem

Condensation and damp patches on rafters

Trapped moisture rots timber, rusts nails and soaks insulation boards. Left alone, it can lead to structural repairs costing thousands.

Our Fix

Thermal removal clears the foam without damaging timbers, then we check moisture levels and advise on ventilation. We can treat early rot before it spreads.

Problem

Roof cannot breathe because eaves are blocked

Airflow stops, condensation builds and your loft smells damp. In summer, the space overheats and can warp stored items.

Our Fix

We clear foam from the eaves and ridge, restoring the airflow your roof was designed for. Most customers notice a drier loft within days.

Problem

Hidden leaks masked by spray foam

Water tracks along foam and pools in unexpected places, so you do not spot the leak until serious damage is done.

Our Fix

Our boroscope and thermal camera survey finds hidden leaks before we start. We remove the foam, expose the leak and can recommend a roofer if repairs are needed.

Why Cheltenham homeowners book thermal removal

Why Cheltenham homeowners book thermal removal

Thermal removal is not just about getting foam out. It is about restoring ventilation, passing a survey and stopping the rot before it spreads through your roof timbers.

  • Restores roof ventilation

    Foam blocks the airflow your roof needs. Once we clear it, air moves freely again through the eaves and ridge, which drops condensation and stops timber rot spreading. Most lofts we finish show a measurable drop in moisture within two weeks.

  • Unblocks mortgage sales

    Lenders routinely refuse loans on foam-insulated roofs. Our thermal spray foam removal Cheltenham service gives you the paperwork and clean roof void a surveyor needs. We have helped buyers in Charlton Kings and Leckhampton complete purchases that had stalled for months.

  • Protects roof timbers

    Trapped moisture rots rafters, battens and felt from the inside. Heat based removal lets us lift foam without gouging the timber, so sound rafters stay sound. Where rot has already started, we flag it early so you can treat it before it becomes a structural job.

  • Cuts long-term bills

    A foam-filled loft often overheats in summer and traps damp in winter. Clearing it and reinstating a proper vapour barrier and insulation boards gives you a drier, more stable roof space. Customers in Prestbury reported cooler lofts the same summer we finished.

Trust and proof

Licensed & Certified

  • CHAS Accreditation — issued by CHAS
  • SafeContractor — issued by SafeContractor
  • PASMA — issued by Prefabricated Access Suppliers' and Manufacturers' Association
  • IPAF — issued by International Powered Access Federation
  • Constructionline — issued by Constructionline

Verified Reviews

Google ★★★★★4.9

Removed spray foam from our loft in Montpellier. The team was punctual, tidy and explained everything. Our mortgage lender accepted their report without question. Highly recommend.

Google ★★★★★5.0

We had foam in a rental property in Charlton Kings and needed it gone quickly. They fitted us in within a week and finished in a day. No mess, no fuss, fair price.

Checkatrade ★★★★★4.8

Professional job from start to finish. They used thermal tools to remove the foam without damaging our old rafters. The loft is now dry and we have proper ventilation.

Five years of specialist spray foam removal

Spray Foam Heritage Homes has been removing spray foam since 2021, working exclusively on insulation removal across Cheltenham and Gloucestershire. Our technicians hold PASMA and IPAF certifications for safe working at height, and we operate to CHAS and SafeContractor standards. We have cleared foam from hundreds of lofts, from single rafters in Tivoli to full roofs in Bishops Cleeve. Because we only do removal, we know every foam brand and how each one behaves under heat.

  • PASMA and IPAF certified for safe roof and scaffold access on every job.
  • CHAS and SafeContractor accredited, with full public liability cover.
  • Experienced with Icynene, Lapolla, Demilec, BASF and Huntsman foam systems.
  • Boroscope and thermal imaging camera used on every survey to find hidden moisture.
  • Five years in business, all of it spent on spray foam removal in Gloucestershire.
Get Started Today
Five years of specialist spray foam removal

Frequently Asked Questions

Real answers to the questions we hear most often from local homeowners and property managers.

How much does thermal spray foam removal cost in Cheltenham?
Most lofts in Cheltenham cost between 1,800 and 4,500 pounds, depending on foam type, roof size and access. A single-rafter job in a small terrace can start around 1,200 pounds, while a full detached roof in Bishops Cleeve with scaffolding may reach 6,000 pounds. We quote after a free survey, so you know the exact figure before we start.
Is thermal spray foam removal safe in Cheltenham Gloucestershire?
Yes. Heat based removal is safe for your roof and your family. We do not use harsh chemicals, and the heat only softens the foam, not the timber. Our team wears respirators and uses air scrubbers to keep dust contained. Once we finish, the loft is clean and ready to use the same day.
What is the best heat based spray foam removal near me in Cheltenham?
The best option is a specialist who only does removal and carries thermal imaging cameras to check for hidden moisture. We have worked across Cheltenham since 2021 and use hot knife and thermal tools on every job. Ask any contractor for before-and-after photos and lender references before you book.
Does thermal removal damage insulation in Cheltenham?
No. Thermal removal targets the spray foam, not your existing insulation boards or vapour barrier. If the boards are sound, we leave them in place. If foam has soaked them, we remove and replace them. We check everything with a moisture meter and tell you exactly what needs replacing before we quote.

Related Services

Spray Foam Removal near me

If you are searching for spray foam removal near me in Cheltenham, we cover every neighbourhood from Montpellier to Prestbury. Our local vans carry thermal tools and extraction kit, so we can often survey within 48 hours.

View Spray Foam Removal near me

same day Spray Foam Removal

For urgent cases, such as a mortgage deadline or a leaking roof, we offer same day spray foam removal across Cheltenham. Call before 10am and we can often have a team on site the same afternoon.

View same day Spray Foam Removal

24/7 Spray Foam Removal

Our 24/7 spray foam removal line is for emergencies, like storm damage exposing foam or a sudden leak. We answer calls around the clock and can arrange emergency attendance across Gloucestershire.

View 24/7 Spray Foam Removal

Residential Spray Foam Removal

Most of our work is residential spray foam removal in Cheltenham homes, from Victorian terraces in Tivoli to modern houses in Hatherley. We protect your furnishings and leave the loft clean.

View Residential Spray Foam Removal

Commercial Spray Foam Removal

We handle commercial spray foam removal for Cheltenham businesses, including offices, workshops and retail units. Work can be scheduled out of hours to avoid disrupting your operation.

View Commercial Spray Foam Removal

loft spray foam removal

Loft spray foam removal is our most common job in Cheltenham. We clear foam from rafters, purlins and roof felt, restoring ventilation and making the space usable again.

View loft spray foam removal

Book thermal spray foam removal in Cheltenham today

Call Spray Foam Heritage Homes on 01242375143 for a free survey and fixed quote. We are CHAS accredited, fully insured and have five years of spray foam removal experience across Gloucestershire. Same-day quotes available.

Call 01242375143 Get a free quote

Contact our Cheltenham team

Call us on 01242375143 or email [email protected] and we will arrange a free survey at your Cheltenham property. Our phone line is answered 24/7, and we aim to book surveys within 48 hours across Gloucestershire. If you have photos of the foam, send them over and we can often give you an initial view before we visit.

Or call us right now at 01242375143 — we answer.

Spray Foam Heritage Homes


  • Phone

    01242375143
  • Address

    15-21 Clarence Street, Cheltenham, GL50 3JL, UK, Cheltenham, Gloucestershire

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call 01242375143 Get Quote
Call Quote