Free site survey and report
We attend your Cheltenham unit, measure the foam area and check for trapped moisture with a boroscope, moisture meter and thermal imaging camera. You receive a written scope, fixed price and programme within 48 hours.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
5+ Years Trusted in Cheltenham
What our Warehouse spray Foam removal includes
Every warehouse spray foam removal in Cheltenham is quoted as a complete package, so you know what is covered before we start. If your deck needs timber repairs or new insulation, we price that separately and clearly.
Contained foam removal
We build negative-pressure containment and strip the foam using dry ice blasting machines, sand blasting equipment or thermal removal tools. Industrial vacuums and air scrubbers keep dust out of your stock and racking.
Waste removal and disposal
All foam waste is bagged, removed from site and disposed of under waste transfer notes. Where possible we separate material for recycling, which supports Cheltenham clients with sustainability or waste reporting requirements.
Deck inspection and photos
Once the foam is off, we inspect the roof deck, purlins and wall panels and photograph any timber rot, hidden leaks or failed vapour barrier. Those images form the evidence base for your lender, insurer or building control.
Completion pack
You get before-and-after photos, moisture readings, thermal images and a removal certificate in one document. Most Cheltenham clients need it for lenders, insurers or a future sale, and it is included in the price.
What Warehouse spray Foam removal in Cheltenham involves
Warehouse spray Foam removal in Cheltenham is the controlled stripping of open cell and closed cell spray foam from roof decks, wall panels and structural steel. We use dry ice blasting machines, industrial vacuums and air scrubbers to lift polyurethane foam without damaging the substrate. Every job starts with a boroscope and moisture meter survey, because trapped moisture under foam is the real problem. We then cut, blast or thermally soften the foam, bag it and remove it under waste transfer notes.
Most Cheltenham warehouse owners call us because spray foam applied years ago is now failing. Condensation builds up, roof ventilation is blocked and timber battens start to rot. If you search for industrial warehouse foam removal near me Cheltenham Gloucestershire, you need a contractor who understands commercial units, not just lofts. We also handle warehouse insulation removal Cheltenham Gloucestershire for landlords, managing agents and owner-occupiers across the GL postcode area.
How our warehouse foam removal process works
Every warehouse spray foam removal in Cheltenham follows the same five-stage process. It keeps your people safe, your building compliant and your downtime predictable.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and methods we use for foam removal
Tools & Equipment
Dry ice blasting machine
Freezes and lifts foam from steel and concrete without water or chemicals. Ideal for Cheltenham warehouse steelwork and areas with electrical services nearby.
Sand blasting equipment
Strips stubborn closed cell foam from brick, concrete and floors. Always used inside full containment with air scrubbers to control dust.
Thermal removal tools
Apply controlled heat to soften rigid foam before cutting. Used on roof decks where mechanical blasting would risk damaging fixings.
Industrial vacuum and air scrubber
Capture foam dust at source and filter the air inside containment. This is what keeps your stock, racking and machinery clean during removal.
Boroscope and moisture meter
Inspect behind foam and measure moisture in timbers and decks. These readings form the evidence base in our survey and completion reports.
Thermal imaging camera
Reveals hidden leaks, cold bridging and areas where foam has failed. The images are included in the report for lenders and surveyors.
Scaffolding and respirators
Provide safe access to high roof decks and protect our operatives from foam dust. All working at height is planned under PASMA and IPAF guidance.
Methods & Standards
Contained dry ice blasting
Our default method for warehouse roof decks. Dry ice pellets freeze the foam so it releases from the substrate, then industrial vacuums capture the debris. No water, no chemicals and no residue left on steelwork.
Zoned phased removal
We divide the warehouse into zones and move containment as we go. This keeps part of your building live throughout the project and is how we deliver most commercial warehouse spray foam removal Cheltenham contracts.
Thermal softening and cutting
For rigid closed cell foam bonded hard to a deck, we soften the foam with controlled heat and cut it away in sections. It is slower than blasting but safer where fixings or services are close to the surface.
Post-removal deck survey
Every job ends with a boroscope and moisture meter inspection of the exposed deck. We photograph anything that needs repair and include it in the completion pack, so nothing is hidden once the foam is gone.
When to book Warehouse spray Foam removal in Cheltenham
01
A lender or surveyor has flagged spray foam during a commercial refinance or sale in Cheltenham.
What we do: We survey the unit, document the foam and remove it under contained conditions. You receive a completion pack with before-and-after photos, moisture readings and a removal certificate that lenders and surveyors accept.
→ Funding or sale completes, usually within four to six weeks of the first survey.
02
Foam was installed over roof vents and the warehouse now suffers condensation and drips.
What we do: We strip the foam from the affected roof sections, clear the ventilation path and check airflow with a boroscope. Any corroded fixings or damp timbers are reported and repaired.
→ Condensation stops, fixings dry out and stock near the roof is no longer at risk.
03
A 300 to 600 sq m warehouse roof deck has failing foam and the owner wants it gone before re-insulating.
What we do: We phase the removal in zones so part of the building stays live. Dry ice blasting or thermal removal tools lift the foam, and industrial vacuums capture dust at source.
→ A clean, dry deck ready for new insulation boards and vapour barrier, usually within five to eight working days.
04
A landlord in Arle needs foam removed between tenancies and wants minimal disruption.
What we do: We work to a fixed programme, often over nights or weekends, and hand over a completion pack at the end. The unit is swept, photographed and ready for the next tenant.
→ The unit is re-let faster because the foam issue is documented and closed out.
How Warehouse spray Foam removal runs in Cheltenham
Cheltenham's building stock shapes how we work. The town has a mix of older industrial units around Arle, Alstone and St Paul's, plus newer commercial sheds near Brockworth, Quedgeley and Kingsway. Older units often have timber roof decks and limited access, so we plan scaffolding and containment carefully. Newer sheds usually have metal decks where dry ice blasting works best. The local climate matters too: Gloucestershire sees damp winters and humid summers, and foam that traps moisture through both seasons causes rot faster than owners expect. That is why every warehouse spray foam removal in Cheltenham starts with a moisture survey. If you are planning how to plan warehouse spray foam removal in Cheltenham, build in a survey first, then a phased programme that keeps your operation running. We also work to current building regulations on ventilation and insulation, and provide documentation that satisfies lenders, insurers and building control across Gloucestershire.
Neighborhoods We Serve
-
Arle
Older industrial units with timber roof decks. We often find trapped moisture and rot here, so surveys focus on the deck structure as well as the foam.
-
Brockworth
Newer commercial sheds with metal decks. Dry ice blasting is usually the fastest and cleanest option on these roofs.
-
St Paul's
Mixed commercial and residential buildings. Access can be tight, so we plan containment and scaffolding around neighbouring properties.
-
Quedgeley
Large distribution-style units. Phased zoned removal keeps loading bays and pick faces open while we work.
-
Bishops Cleeve
A mix of light industrial and storage units. Foam here is often closed cell and bonded hard, so thermal or blasting methods are used.
Local Conditions We Plan For
-
Damp Gloucestershire winters and humid summers
Moisture cycles through the roof space and foam traps it against the deck. Rot and corrosion progress faster, so removal should not be delayed once moisture is detected.
-
Older timber roof decks in central Cheltenham units
These decks are more fragile than metal, so we favour thermal softening and careful cutting over aggressive blasting to avoid damaging the structure.
-
Tight access around Arle and St Paul's
Scaffolding and containment need planning around neighbouring buildings and yards. We survey access at the same time as the foam so the programme is realistic.
-
Live warehouse operations during removal
Most Cheltenham clients cannot shut down. Zoned working, night shifts and negative-pressure containment keep stock, racking and staff protected throughout.
400 sq m roof deck in Arle
Problems our Warehouse spray Foam removal in Cheltenham solves
Foam that was installed years ago often causes more problems than it solves. Here are the issues we see most on Cheltenham warehouse sites and how we fix them.
Problem
Trapped moisture rotting roof timbers
Foam seals the deck so moisture cannot escape. Timber battens and purlins rot, fixings weaken and roof repairs become far more expensive than foam removal would have been.
Our Fix
We strip the foam, dry the deck and treat or replace affected timber. On a typical Cheltenham unit we remove 4 to 6 tonnes of foam and restore airflow across the whole roof void.
Problem
Mortgage or refinance refused
Lenders and surveyors often refuse funding when spray foam is present because it hides the roof structure. Sales stall, refinance is delayed and owners lose time and money.
Our Fix
We provide a documented removal report with moisture readings and photographs of the exposed deck. Lenders and surveyors across Gloucestershire accept our completion pack, and we have unblocked refinance on units in Arle and Brockworth.
Problem
Blocked roof ventilation and condensation
Foam sprayed over eaves and vents stops air moving through the roof space. Condensation builds, metal fixings corrode and stock stored near the roof can be damaged by drips.
Our Fix
We remove foam from vents and eaves, clear the ventilation path and check airflow with a boroscope. Where ventilation was covered permanently, we reinstate it as part of the removal works.
Problem
Insulation failure and rising bills
Foam that has separated from the deck or become wet stops insulating. Heating costs rise, the building feels cold and the original energy savings disappear.
Our Fix
We remove the failed foam, inspect the substrate and prepare the deck for new insulation boards and vapour barrier. Customers in St Paul's and Tivoli have seen gas usage fall by 15 to 25 percent after replacement.
Why Cheltenham businesses choose our foam removal
Foam removal is not just a tidy-up job. It protects your building, your stock and your lending position. Here is what our Cheltenham customers gain.
-
Protects structural timbers
Trapped moisture under spray foam rots roof timbers and battens. We strip the foam, dry the deck and treat affected timber before it needs replacing. On a typical 500 sq m Cheltenham unit we remove 4 to 6 tonnes of foam and restore airflow across the whole roof void.
-
Satisfies mortgage lenders
Many lenders refuse mortgages or commercial refinance when spray foam is present. Our documented removal reports and photographic evidence give surveyors what they need. We have supported mortgage lender spray foam removal on units in Arle and Brockworth where funding was on hold.
-
Cuts energy waste
Failed insulation lets heat escape and drives up bills. Once we remove the foam and reinstate correct insulation boards and vapour barrier, warehouse heating costs drop. Customers in St Paul's and Tivoli have seen gas usage fall by 15 to 25 percent after replacement.
-
Keeps your operation running
We plan around your shifts, deliveries and loading bay schedules. Most warehouse foam extraction Cheltenham projects run in phases so part of the building stays live. Night and weekend working is available at no premium for contract clients.
Accredited and reviewed in Cheltenham
Licensed & Certified
- CHAS Accreditation — issued by CHAS
- Constructionline Registration — issued by Constructionline
- SafeContractor Approval — issued by SafeContractor
- PASMA and IPAF Training — issued by PASMA and IPAF
- NVQ Qualifications — issued by City & Guilds
Verified Reviews
Google ★★★★★4.9
Removed foam from our 350 sq m warehouse roof in Cheltenham. Clean, contained and finished ahead of schedule. The completion pack was exactly what our insurer asked for. Would use again.
Google ★★★★★5.0
We had a lender refusing refinance because of spray foam. They surveyed, quoted a fixed price and removed it in under a week. Funding went through the following month. Straightforward and well documented.
Checkatrade ★★★★★4.8
Worked nights so our loading bays stayed open. Dust control was excellent and the deck was spotless when they finished. The moisture readings before and after were a nice touch.
Google ★★★★★4.9
Professional from survey to handover. They found rot in two purlins that we did not know about and reported it with photos before doing anything. Fair pricing and no surprises.
Five years of spray foam removal expertise
Spray Foam Heritage Homes has been removing spray foam since 2021. In five years we have stripped foam from warehouses, lofts, attics and cavity walls across Cheltenham and Gloucestershire. Our team trains on Icynene, Lapolla, Demilec, BASF and Huntsman foam systems, so we know how each one behaves when it is cut, blasted or heated. We hold PASMA, IPAF and NVQ qualifications, plus CHAS, Constructionline and SafeContractor accreditation. That matters when your insurer or lender asks who worked on your building.
- Five years specialising in spray foam removal, founded in Cheltenham in 2021
- Trained on Icynene, Lapolla, Demilec, BASF and Huntsman foam systems
- PASMA, IPAF and NVQ qualified operatives for safe working at height
- CHAS, Constructionline and SafeContractor accredited contractor
- Experienced in commercial units, warehouses and industrial roof decks
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners and property managers.
How much does warehouse spray foam removal cost in Cheltenham?
Most warehouse spray foam removal in Cheltenham costs between 12 and 28 pounds per square metre in 2026. A 300 sq m roof deck typically lands between 3,600 and 8,400 pounds including waste removal and documentation. Access, foam thickness and whether the deck needs repairs are the main variables. We give you a fixed price after a free site survey.
Can you remove spray foam from a warehouse in Cheltenham Gloucestershire?
Yes. We remove open cell and closed cell spray foam from warehouse roof decks, wall panels and structural steel across Cheltenham and Gloucestershire. We use dry ice blasting, sand blasting and thermal removal tools depending on the substrate. Every job is contained, dust-controlled and finished with a removal certificate for your records.
What is the best warehouse foam removal near me in Cheltenham?
The best contractor is the one who surveys first, quotes in writing and documents the removal. We have worked on commercial units across Cheltenham since 2021 and hold CHAS, Constructionline and SafeContractor accreditation. Ask any contractor for their method statement, waste transfer process and completion pack before you book.
Can you work around warehouse operations in Cheltenham?
Yes. We phase the work so part of your building stays live, and we can work nights or weekends. Most Cheltenham warehouse foam extraction projects run in zones, with containment moving as we go. You keep your loading bays and pick faces open, and we agree the programme with your operations manager before we start.
Related Services
Spray Foam Removal near me
If you need spray foam removal near me in Cheltenham, we cover the whole GL postcode area. The same team that handles warehouse projects also works on lofts, attics and cavity walls, so you get one contractor and one standard of documentation.
View Spray Foam Removal near mesame day Spray Foam Removal
Same day spray foam removal is available for small urgent jobs in Cheltenham, such as a surveyor flagging foam before a valuation. For warehouse-scale work we usually survey same day and start within the week, depending on access and containment.
View same day Spray Foam Removal24/7 Spray Foam Removal
Our 24/7 spray foam removal line covers Cheltenham for emergencies like water ingress after a storm or a collapsed roof section. Call 01242 375143 any hour and we will arrange an assessment, then schedule full removal around your operation.
View 24/7 Spray Foam RemovalResidential Spray Foam Removal
Residential spray foam removal is the domestic side of what we do, covering lofts, attics and cavity walls in Cheltenham homes. It uses the same containment and dust control as our warehouse work, just on a smaller scale and with less disruption to your household.
View Residential Spray Foam RemovalCommercial Spray Foam Removal
Commercial spray foam removal covers warehouses, retail units and industrial buildings across Cheltenham. We handle larger areas, higher access and stricter health and safety requirements, and we provide the RAMS and completion pack your insurer or lender expects.
View Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal is often needed when a Cheltenham homeowner finds foam blocking roof ventilation. We strip it, inspect the timbers and reinstate airflow, which is usually what surveyors want to see before a sale completes.
View loft spray foam removalContact our Cheltenham team
Call us on 01242375143 or email [email protected] and we will arrange a free survey at your Cheltenham property. Our phone line is answered 24/7, and we aim to book surveys within 48 hours across Gloucestershire. If you have photos of the foam, send them over and we can often give you an initial view before we visit.
Spray Foam Heritage Homes
-
Phone
01242375143 -
Address
15-21 Clarence Street, Cheltenham, GL50 3JL, UK, Cheltenham, Gloucestershire
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available